Components
A) (3) - #2/0 AWG (12 strand) SIW, 8000 series, aluminum conductors w/50 mils (1.27 mm) heat and moistureresistant, polyvinyl chloride (PVC) insulation and jacketed w/ 7 mils (0.18 mm) nylon applied directly to thesurface of the insulation.
B) (9) - #18 AWG Class K stranded, soft drawn, bare copper conductors w/15 mils (0.38 mm) heat and moisture
resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 4 mils (0.10 mm) nylon applied directly to the
surface of the insulation.
C) Flame resistant non-hygroscopic fillers (as needed).
D) (1) - #4 AWG Class B (7 strand), 8000 series, aluminum conductor w/40 mils (1.02 mm) heat and moisture
resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 6 mils (0.15 mm) nylon applied directly to the
surface of the insulation.
E) Mylar binder tape.
F) 80 mils (2.03 mm) of heat and moisture resistant, polyvinyl chloride (PVC) jacket. A ripcord shall be placed
underneath the jacket.
 
Specifications
Conductors: ASTM B 3, ASTM B 174, ASTM B 801, ASTM B 836
Insulation: ICEA S-95-658 (NEMA WC 70), ICEA S-73-532 (NEMA WC 57), UL 83 for Type THWN wires
Jacket: ICEA S-95-658 (NEMA WC 70), ICEA S-73-532 (NEMA WC 57), UL 1277
 
Ratings
UL: TC-ER-JP 600V
UL: THWN 600V

The insulation is acceptable for use in locations at 75 °C dry and 75 °C wet. The cable is suitable for use in cable trays, aerial or direct burial installations. The cable is JP rated for installation in accordance with Part II of Article 334.
 
Electrical
Voltage: 600V
 
Print Legend
(UL) E60544-PA POWER AND CONTROL TRAY CABLE TYPE TC-ER-JP 2/0 AWG AL (67,4 mm2) 3/C + 4 AWG AL (21,2 mm2) 1/C GROUND THWN CONDS 75C DRY/75C WET & 18 AWG (0,82 mm2) 9/C TFFN CONDS 600V OIL RES I SUNLIGHT RESISTANCE DIRECT BURIAL JOIST PULL TCERDirect PN 2023TCERJP3032AL9 "sequential footage print"