COMPONENTS
A) (3) - #6 AWG Class C (19 strand), soft drawn, bare copper circuit conductors w/ 30 mils (0.76 mm) heat andmoisture resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 5 mils (0.13 mm) nylon applied directly to the surface of the insulation.
B) (9) - #18 AWG Class K stranded, soft drawn, bare copperconductors w/15 mils (0.38 mm) heat and moisture resistant,polyvinyl chloride (PVC) insulation and jacketed w/ 4 mils(0.10 mm) nylon applied directly to the surface of the insulation.
C) (1) - #8 AWG Class C (19 strand), soft drawn, bare coppergrounding conductor w/ 30 mils (0.76 mm) heat and moistureresistant, polyvinyl chloride (PVC) insulation and jacketedw/ 5 mils (0.13 mm) nylon applied directly to the surface ofthe insulation.
D) Mylar binder tape.
E) (1) 60 mils (1.52 mm) of heat and moisture resistant,polyvinyl chloride (PVC) jacket.
 
CONDUCTOR COLOR CODE
6 AWG: Black, White and Red
8 AWG: Green
18 AWG: Black, Red, Yellow, Yellow/Black, Blue, White, Purple, Purple/Black
 
SPECIFICATIONS
Conductors: ASTM B 3, ASTM B 8, ASTM B 174, ASTM B 787
Insulation: ICEA S-95-658 (NEMA WC 70), ICEA S-73-532 (NEMA WC 57), UL 83 for Type THWN wires
Jacket: ICEA S-95-658 (NEMA WC 70), ICEA S-73-532 (NEMA WC 57), UL 1277
 
ELECTRICAL
Voltage: 600V

RATINGS
UL: THWN 600V
UL Type: TC-ER-JP 600V

The insulation is acceptable for use in locations at 75 °C dry and 75 °C wet. The cable is suitable for use in cable trays, aerial or direct burial installations. The cable is JP rated for installation in accordance with Part II of Article 334.
 
PRINT LEGEND
(UL) E60544-(plant) POWER AND CONTROL TRAY CABLE TYPE TC-ER-JP 6 AWG (13,3 mm2) 3/C+ 8 AWG (8,37mm2) 1/C GROUND THWN CONDS 75C DRY/75C WET & 18 AWG (0,82 mm2) 9/C TFFN CONDS 600V OIL RES I SUNLIGHT RESISTANCE DIRECT BURIAL JOIST PULL TCERDirect P/N XXXXXX “sequential footage print”
 
All products are intended for use by a licensed electrician in compliance with all product information and applicable building codes, laws and regulations. Gen-Pro Products, LLC disclaims any liability for injuries to persons or damage to property arising from the improper installation of this product, installation by non-qualified persons or the use of this product for applications other than as specified. All dimensional data is nominal and subject to normal manufacturing tolerances. The information provided on this specification sheet is for guidance only. Purchasers of this product should consult with a licensed electrician regarding its applicability, use and proper installation.